Greenhouse Equipment

Outdoor Hummingbird Comfortmeter

Outdoor temperature / humidity monitor Gardeners, weather watchers, and bird lovers will all enjoy this outdoor temperature/humidity monitor. The classic design features a hummingbird in flight. Easy to read at a glance, the 4" dial has both Fahrenheit...

Permaflect Reflective Foil Insulation, 54" wide

Foil Insulation saves heating dollars! - C7572 Our insulation improves your greenhouse and saves money by keeping it warmer and dramatically enhancing light levels.  This tough, reinforced foil is easy to install and can be wiped clean for long-lasting,...

Photobio VP 32W LED 4ft Light Fixture, 2 pak, w/ 120V power cord

PHOTOBIO•VP is a modular, high-efficiency LED system designed for vegetative, propagation, and vertical farming. A slim vertical profile maximizes vertical real estate allowing greater production space, and modular design lets you link and power multiple...

Plug-In Pre-Wired Humidistat

Easy to install - prewired - E3452 Automatically controls your humidifier or misting system. Ready to use:1. Plug humidistat into 120-volt outlet2. Plug your humidifying equipment into the humidistat3. Turn the control dial to desired setting.Range 30%...

Poly Misting Nozzle

Use with M6045 PVC Misting Tees Select:1 GPH Nozzle (color is White or Gray as available):  approx 1.0 GPH with stainless steel filter - For propagation & overhead misting2 GPH Nozzle (color is Blue or Yellow as available):  approx 2.0 GPH...

Poly Patch Tape

Poly Mending Tape Extend the life of your covering. Mend polyethylene fast and easy. Long-lasting, super-stick, clear adhesive. UV protected. Many uses. 54 ft roll (self-wound, no release liner). Select:2" wide4" wide******************Installation...

Powered Ventilation System

Automatically cool your greenhouse Powerful, forced air ventilation automatically cools your greenhouse when needed. The fan is matched with a specific size of shutters to provide you the optimum airflow. The weather-resistant thermostat allows you to...

Pre-Wired Fan Speed Control (weather-resistant, series plug, 120V, 5 amp)

Portable Fan Control - E3139 Continuously variable solid-state control lets you select the proper exhaust fan speed and minimum fan starting speed for your greenhouse. Also used on air circulation fans. Use only on fans and blowers with Shaded Pole, PSC,...

Pressure Regulator, 40 psi outlet, Hose/Hose

Preset 40 psi. Hose thread. Every system experiences pressure fluctuations resulting in unwanted flow deviations and over and under-watering.  Optional for use with misting booster pumps if water supply is over 40 psi. Preset pressure from 10-40 psi...

Professional Misting System

Plug 'N Play Mist Kit - M6070 When the super fine mist from this system starts drifting over your plants, they will be so much happier! Evaporation of the mist can cool a greenhouse 10° to 20° F.This expandable system has a simple push-together...

Professional Misting System - 3-Way Slip-Lok Tee

Slip-Lok Tee for Professional Misting System Kit (M6070-KIT) The Slip-Lok Tee is used to connect outdoor mist cooling system lines and assembles in seconds with a simple insert and twist motion. The unique brass Slip-Lok design can be used with both low...

Professional Misting System - Brass End Plug

Brass End Plug for Professional Misting System Kit (M6070-KIT) The Brass End Plug is used to easily and effectively stop water flow at the end of a mist system line that uses a Slip-Lok fitting. The end of a Slip-Lok fitting can be removed by...

Professional Misting System - Nozzle Plug, 5 pak

Brass Nozzle Plug for Professional Misting System Kit (M6070-KIT) The Brass Nozzle Plug is used in place of a mist nozzle on all outdoor mist cooling systems. These plugs are used to replace nozzles in the off season when the mist system is not used and...

Professional Misting System - Replacement Nozzle, 5 pak

Replacement Nozzle for Professional Misting System Kit (M6070-KIT) This brass and stainless mist nozzle are engineered to form a perfect 24" cone pattern that facilitates rapid evaporation and the best possible cooling. Provides approx. 1/2 gph at 75...

Professional Misting System - Slip-Lok Elbow

Slip-Lok Elbow for Professional Misting System Kit (M6070-KIT) The Slip-Lok Elbow is used to connect outdoor mist cooling system lines and assembles in seconds with a simple insert and twist motion. The unique brass Slip-Lok design can be used with both...

Professional Misting System - Slip-Lok Fitting w/Nozzle

Slip-Lok fitting w/Nozzle to expand Professional Misting System Kit (M6070-KIT) Expand your existing system with this brass Slip-Lok Fitting w/Nozzle. Nozzle is brass and stainless steel. Fitting is compatible with 3/8" flexible tubing M6070-TUBE.